Environmental Protection

All Products

Clover Tool Company

Clover Tool Company’s new patent-pending RD-A1 pneumatic nut and bolt rundown tool streamlines make up operations significantly and is specifically designed for low overhead clearance applications.

RD-A1 Pneumatic Nut and Bolt Tool

RD-A1 Pneumatic Nut and Bolt Tool

Clover Tool Company’s new patent-pending RD-A1 pneumatic nut and bolt rundown tool streamlines make up operations significantly and is specifically designed for low overhead clearance applications. The Clover RD-A1 thin profile hex head (no thicker than nut height) enables it to fit onto flange nuts in tight areas like those found under BOP bodies, wing valves, and elbow flanges. If the nut fits, the RD-A1 will fit. The power adjustable magnetic hex head operates up to 1200 RPMs (free spin), reducing nut rundown operation from minutes to seconds. The through-hole design allows longer studs to pass through the tool making stud length a non-issue. The RD-A1 is lightweight and simple to operate with a forward and reverse switch and lever activated. A simple tap releases the nut from the magnetic grip of the tool after a rundown and automatically picks up the nut during run up with release extensions.

    Fluid Components International

    The new ST102A Air/Gas Thermal Mass Flow Meter features an advanced dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.

    ST102A Air/Gas Thermal Mass Flow Meter

    ST102A Air/Gas Thermal Mass Flow Meter

    The new ST102A Air/Gas Thermal Mass Flow Meter features an advanced dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.

    Flow measurement applications involving line sizes 12 inches or greater can realize improved installation accuracy and repeatability by averaging the flow rates of two elements. Distorted, swirling and non-repeatable flow profiles can result in decreased accuracy of single point meters. It is often impractical or impossible to provide the required straight-run for a fully developed flow profile in large lines.

    The transmitter electronics average the input from two independent flow elements into a single output. Each flow element can be independently configured for insertion length and process connection to allow installation flexibility. One flow element can be integral with the flow transmitter, or both can be configured as remote for easier access and visibility to the digital display/optical four button user interface. The flow transmitter also provides independent information for each flow element, saving time when performing service checks.

      Franklin Miller Inc.

      Franklin Miller

      Delumper® S4 Crusher

      The new ultra-sanitary DELUMPER S4 Crusher features a clean-in-place capability, quick change-over of cutting elements, a meticulously polished finish, along with the direct drive for smooth and quiet operation. The unit is available with four styles of cutters for unique versatility. The unit's unique design eliminates internal fasteners. Its precision crushing mechanism produces a once-thru, non-destructive crushing action that reduces oversized particles to their basic grain size without over-grind or over-work of material. DELUMPER® S4 Sanitary Crushers are specially designed and built to meet the high standards of the food, pharmaceutical, and fine chemical industries. A new version of the DELUMPER S4 Crusher was recently introduced that combines the best features of the two prior models with a direct drive system for a highly reliable design.


        IDEAL MBBR™ Moving Bed Biofilm Reactors

        IDEAL MBBR™ Moving Bed Biofilm Reactors

        World Water Works, Inc.'s IDEAL MBBR™ Moving Bed Biofilm Reactors upgrade existing industrial wastewater treatment facilities for overloaded, non-performing, and/or undersized systems. The product can enhance existing performance and increase capacity of existing treatment plants by being installed in a small footprint reactor(s) upstream of the existing biological system.

        The IDEAL MBBR™ acts as a roughing reactor, unloading the existing system by 60-80%. The plant upgrade can be achieved with no disruption in facility manufacturing or wastewater system performance. World Water Works offers a special PAYS™ program that allows this upgrade to be paid overtime.

        Wilden Pump and Engineering Co.

        Pro-Flo Shift

        Pro-Flo Shift

        The Wilden Pro-Flo SHIFT represents a breakthrough in energy efficiency within the AODD pump category. Due to its design, the patent-pending Pro-Flo SHIFT Air Distribution System (ADS) allows Wilden AODD pumps to achieve up to a 60% savings in air consumption over all competitive AODD pump technologies, while providing more product yield per standard cubic foot per minute (SCFM). While the Wilden Pro-Flo SHIFT dramatically improves energy efficiency, it also costs 50% less than an electronically actuated ADS, is submersible, and features plug-and-play operation. Its robust design makes the Pro-Flo SHIFT ideal for use in harsh operating environments and includes ATEX compliance for use in potentially explosive atmospheres. The Pro-Flo SHIFT has fewer operating parts, which equates to less downtime and simple maintenance.

        The Wilden Pro-Flo SHIFT is available in 38 mm (1-1/2”), 51 mm (2”), and 76 mm (3”) sizes and features maximum discharge pressures to 8.6 bar (125 psig), maximum flows to 1,056 lpm (279 gpm) and maximum solid-handling size to 13 mm (1/2”). The Pro-Flo SHIFT is available with maximum suction lifts to 7.2 m (23.8’) dry and 9.0 m (29.5’) wet. 



          Key Performance Sustainability Indicators (KPI) Survey Module

          The addition of the Key Performance Sustainability Indicators (KPI) Survey Module allows Corporate Sustainability Teams to survey facilities for qualitative and quantitative sustainability performance indicators and feedback and aggregate the data to assist in the creation of annual sustainability reports. Administrators can easily track which facilities have not responded to the survey and send quick, standardized follow-up emails to drive action. The KPI Survey module can be configured to assess company-defined key sustainability performance indicators as well as reporting requirements established by third party organizations (such as the Carbon Disclosure Project, Global Reporting Initiative, etc.) to ultimately improve a company’s environmental footprint, meet established sustainability goals and report out to key stakeholders and the public. For one of Gensuite’s Fortune 500 companies that is using this functionality, they have been able to streamline their annual company level reporting processes. 


            New Pig Corp.


            Build-A-Berm Barrier Bladder Section

            Build-A-Berm Barrier Bladder Section helps facilities meet secondary containment regulations while minimizing the overall area needed to provide containment. When used with the Build-A-Berm System, the Bladder Section provides an additional 55 gallons of sump capacity to a secondary containment area. Ideal for use in limited spaces where the current containment area cannot be expanded, The Bladder Section remains out of the way and automatically deploys when a spill occurs.


              EXAIR Co.


              1” Flat Super Air Nozzle

              Flat Super Air Nozzle produces a flat 1" (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target. The unique design of this efficient nozzle makes it an ideal fit for both tight spaces and tight budgets. The 1" Flat Super Air Nozzle uses EXAIR's patented technology to maximize entrained airflow while reducing noise levels. A precise amount of air is released through the .015" (0.38mm) air gap opening that is set with a stainless steel shim positioned between the body and removable cap. The airstream pulls in surrounding room air to produce a wide, forceful stream of high velocity, laminar airflow. Air consumption is 10.5 SCFM at 80 PSIG. The 75 dBA sound level is below the limits of the OSHA maximum allowable noise exposure standard 29 CFR 1910.95(a).  Force and flow may be easily adjusted by installing different shim thicknesses. Optional swivel fittings and Stay Set Flexible Hoses to aim the nozzle are also available. The 1" Flat Super Air Nozzle is available in zinc aluminum alloy construction, suitable for rugged industrial applications. 





                RainTrooper is a site-customized rainwater harvesting system that uses pre-storage filtration and first-flush treatment. It offers both above ground and below ground water storage tank applications, as well as post-treatment with micro-filtration, activated carbon and UV light technology, and pump systems for the distribution of the rainwater for potable and non-potable use. The cisterns may be concrete or fiberglass for cost effective below ground installations, corrosion resistant plastic for above ground applications or aesthetically pleasing corrugated steel tanks providing high visibility of the green system. 





                  3ESC facilitates product compliance and mitigates supply chain risk. The new web-based platform is the foundation for 3E’s supply chain practice, and it is enriched with a range of associated content, services, and solutions to support product compliance initiatives. Those initiatives include compliance assurance, supplier engagement, customer response, reasonable country of origin inquiry (RCOI) due diligence, and obtainment services, along with industry-leading information and documentation management. 3ESC serves as a central repository for critical product, supplier and raw material risk information, including product contents, compliance status, country of origin and georisk. The platform is fueled by content collected from upstream suppliers by 3E’s team of global obtainment specialists and enriched by 3E’s team of regulatory experts.


                    New Pig Corp.


                    Rapid Response Drainblocker Drain Cover

                    The Rapid Response Drainblocker Drain Cover quickly seals both floor and storm drains during spill emergencies. These cost-conscious drain covers are affordable enough to place near all of your facility’s spill-prone drains. They are perfect for fixed facilities, fleets, hazmat, and other response teams who need to meet stringent EPA spill preparation and cleanup regulations. 


                      MSA Worldwide

                      MSA Safety

                      V-Gard Green Safety Helmet

                      The V-Gard® GREEN Protective Helmet is the first industrial safety product produced from renewable resources. Like other hard hats, the MSA V-Gard GREEN Protective Helmet is made of green polyethylene (GPE). What's unique is that the GPE is manufactured from sustainable sugarcane-based ethanol. Even though the V-Gard GREEN is made from sustainable GPE, it still provides the same performance as resins made from nonrenewable raw materials, delivering the same high level of head protection that our V-Gard brand is known for worldwide. To learn more about V-Gard GREEN, visit MSA Booth 2011 at NSC or visit MSAsafety.com. Keyword: GREEN.


                        New Pig Energy


                        PIG Well Pad Liner 130 - LT GY

                        The PIG Well Pad Liner 130 - LT GY combines the proven strength of the original PIC Well Pad Liner 130 with a new lighter gray color that reduces surface temperatures by 10-15 degrees F. Along with providing a high-traction work surface that helps minimize slip-and-fall injuries in wet or dry conditions, by limiting radian heat, New Pig Energy’s newest version can also help minimize heat stress and worker fatigue on the job site. As with other NPE liners, the PIG Well Pad Liner - LT GY is constructed from a multi-layer polypropylene composite with multiples barrier films sandwiched between protective layers of needle-punched geotextile that will absorb nuisance leaks, drips and spills on contact while preventing larger spills from reaching the ground. The PIG Well Pad Line 130 - LT GY is recyclable and incinerable to reduce waste and it helps keep liquids contained while keeping workers cool and on their feet.


                          EXAIR Co.


                          Digital Flowmeter

                          Digital Flowmeter is the easy way to monitor compressed air consumption and waste. Models are now available for ½” to 4” schedule 40 iron pipe and ½” to 6” in iron or copper pipe. The product is available with Summing Remote Display to monitor from a convenient location. The product is also available with Data Logger to record flow rate from once a second up to every 12 hours. The product has an easy-to-read digital display and is easy to install.


                            EOS Remediation


                            EOS 100

                            EOS100 is a 100 percent fermentable, water-mixable vegetable oil-based organic substrate that provides a lasting source of carbon for enhanced in-situ anaerobic bioremediation. EOS100 ships as a concentrate and readily mixes with water on a project site. Compared to our existing emulsified oil products, this new formulation is tailored to provide optimal oil retention in high K aquifers and soils with characteristically low oil retention such as fractured bedrock and sandy aquifers. 


                              Free e-News Subscription

                              I agree to this site's Privacy Policy