A nuclear waste cask is loaded onto a barge during the Sandia National Laboratories "triathlon." (Photo courtesy Sandia National Laboratories)

Sandia Details 'Transport Triathlon' Results

The eight-month test involved a waste transportation and storage cask fresh off the assembly line being loaded with three surrogate fuel rod assemblies from the United States, Spain, and South Korea and then traveling from Spain to Colorado and back again by truck, ship, and train.

Sandia National Laboratories, a DOE facility in Albuquerque, N.M., reported this month that its researchers completed an eight-month, 14,500-mile "transport triathlon" to gather data on the bumps and jolts spent nuclear fuel experiences during transportation. The data from their test could be used to demonstrate the safe transportation of spent nuclear fuel as it journeys from the nuclear power plants where it is generated to interim storage locations and, perhaps, eventually to a permanent geologic disposal site.

Nuclear power supplies almost 20 percent of U.S. electricity, according to Sandia's news release this month, but it produces between 2,200 and 2,600 tons of spent fuel in the United States annually. The fuel rods become brittle and highly radioactive while powering the nuclear reactor, which means safe transportation is very important.

The test involved a waste transportation and storage cask fresh off the assembly line being loaded with three surrogate fuel rod assemblies from the United States, Spain, and South Korea and then traveling from Spain to Colorado and back again by truck, ship, and train. Zirconium alloy tubes filled with lead rope, lead pellets, or molybdenum pellets imitated the uranium oxide pellets inside a spent fuel rod.

"All of our preliminary data suggests that the likelihood of a fuel rod breaking during routine handing and transportation is low. This test is more realistic than past tests and could result in a more reliable quantification of the transportation risks," explained Sylvia Saltzstein, manager of the transportation projects. For the test, Sandia collaborated with Equipos Nucleares S.A., the Spanish cask designer and manufacturer, and Empresa Nacional de Residuos Radiactivos S.A., the corporation responsible for managing nuclear waste in Spain. The Korea Radioactive Waste Agency, Korea Atomic Energy Research Institute, and DOE's Pacific Northwest and Argonne national laboratories also took part.

The "triathlon" began in Spain with truck travel, then switched to a barge for transport to Belgium, and then onto a cargo ship that crossed the Atlantic Ocean to Baltimore, where it was transferred to a railcar and traveled about 2,000 miles through a dozen states. In partnership with the Association of American Railroads, the cask and fuel assemblies were tested at the Transportation Technology Center Inc. facility near Pueblo, Colo., and afterward the cask with its sensors reversed course and returned to Spain.

The release said this "triathlon" was Sandia's fourth test to measure routine transportation strains. The first one used a shaker table to test Sandia's sensor-studded mock fuel assembly. The second test placed the same assembly on a truck trailer loaded with 50,000 pounds of concrete, the same as a transportation cask, and took it on a 38-mile trip on highways, city streets, and dirt roads. Both of these tests showed similar, very low levels of strain on the mock fuel. And the third test was of shocks and vibrations experienced riding the rails.

Analysis of the results is under way. "Preliminary results show very low shock and vibration levels, which we will compare to the mechanical properties of fuel that's come out of a nuclear power reactor," said Paul McConnell, project manager for the tests. "Ultimately, we want to understand if the fuel can withstand the accumulation of shocks and vibrations during the journey that could potentially cause a fuel rod to break."

The test was partially funded by the DOE Office of Nuclear Energy's Spent Fuel and Waste Science and Technology program.

Download Center

  • Waste Management in 2021: Accelerate Your Success with Technology

    Join waste management experts on February 23rd for a live best practice session webinar. You’ll learn how to take your waste program to the next level with visual location, barcoding, and mobility. Register now.

  • Green Quadrant EHS Software 2021

    Reserve your copy of the new report by independent analyst firm, Verdantix, to get a detailed, fact-based comparison of the 22 most prominent EHS software vendors in the industry.

  • Your Guide to Environmental Metrics that Drive Performance

    Translating sustainability into action starts with implementing the right metrics to assess your environmental risk and performance. Learn how to design metrics that improve your decision-making process and drive enterprise performance.

  • 5 Keys to Best-in-Class Chemical Management

    Running a safe chemical program is challenging and complex: from knowing what's on-site to proper handling and disposal - all while navigating regulatory changes. Learn the best ways to mitigate chemical risk, get the most value out of your data, and gain buy-in for a chemical management solution.

  • Unpacking ESG: 6 Questions You Were Too Afraid to Ask

    Environmental and Sustainability experts from Arcadis and Cority answer 6 of the most pressing questions EHS professionals have about getting started with Environmental, Social, and Governance (ESG) reporting.

  • Industry Safe