Tips Tuesday: How to Save Money and Energy While Staying Cool this Summer
The summer heat is here. To help you and your family stay cool, comfortable and save energy, the EPA’s Energy Star program suggests a few simple steps.
The average American home spends almost 20 percent of its utility bill on cooling. Increased energy production to run cooling systems raises your costs and contributes to pollution that adversely affects the quality of the air we breathe. Here are seven simple ways to help protect your wallet and the environment:
Use Ceiling Fans Optimally. Run your ceiling fan to create a cool breeze. If you raise your thermostat by only two degrees and use your ceiling fan, you can lower cooling costs by up to 14 percent. Remember that ceiling fans cool you, not the room, so when you leave the room make sure to turn off the fan.
Maximize Shade. Pull the curtains and shades closed before you leave your home to keep the sun’s rays from overheating the interior of your home. If you can, move container trees and plants in front of sun-exposed windows to serve as shade.
Find the Best Thermostat Settings. If you have a programmable thermostat, program it to work around your family’s summer schedule—set it a few degrees higher (such as 78 degrees) when no one is home, so you are not cooling an empty house.
Reduce Oven Time. Use a microwave or grill outside instead of oven cooking, when you can. Ovens take longer to cook food and can make your house warmer, requiring your air conditioning system to work harder to keep the house at a comfortable temperature.
Check Air Conditioner Filters. Check your cooling system’s air filter every month. If the filter looks dirty, change it. A good rule is to change the filter at least every three months. A dirty filter will slow air flow and make the system work harder to keep you cool—wasting energy. Also, remember to have your system serviced annually to ensure it’s running at optimum efficiency for money and energy savings.
Change to More-Efficient Light Bulbs. Change out incandescent light bulbs with more energy-efficient lighting choices. Energy Star-qualified lighting uses less energy and also produces approximately 75 percent less heat than incandescent lighting.
Plug Duct System Leaks. As much as 20 percent of the air moving through your home’s duct system is lost due to leaks and poor connections. Seal duct work using mastic sealant or metal tape and insulate all the ducts that you can access (such as those in attics, crawlspaces, unfinished basements, and garages). Also, make sure that connections at vents and registers are well-sealed where they meet floors, walls, and ceilings. These are common locations to find leaks and disconnected ductwork.