Environmental Protection

All Products


Trojan Technologies

Trojan UVSigna Disinfection System

Trojan Technologies’ TrojanUVSigna is an open channel wastewater UV disinfection system specifically designed for large-scale disinfection applications. The system includes 1000W TrojanUV Solo Lamp technology; a solo lamp driver; a staggered, inclined lamp arrangement; ActiClean chemical/mechanical sleeve cleaning; and a built-in module lifting device.

    XploSafe LLC

    XPell

    Peroxides Prevention Product

    XPell, a product that indicates and prevents the formation of peroxides in organic solvents, removes the need for periodic testing and disposal of peroxide-forming solvents. Use of this inorganic material improves laboratory safety, helps to prevent peroxide-related explosions/accidents, and extends the life of solvents. It is designed for university chemistry labs, analytical labs, pharmaceutical labs, pharmaceutical manufacturers, research labs and hazardous waste disposal company applications.

      AkzoNobel Surface Chemistry

      NPE Replacement

      NPE Replacement

      AkzoNobel Surface Chemistry’s Berol® 609 is an alcohol ethoxylate blend designed to match the key properties and performance of nonylphenol ethoxylates (NPEs) typically used in industrial degreasing formulations (NP9 and NP10 ). At the same time, this product provides a safe, biodegradable alternative and exceeds the degreasing power of other NPE replacements. Completely water-soluble, it may be used as a direct, drop-in replacement for NP9 and NP10 in aqueous cleaning formulations.

        CBI Polymers

        Gel Decontaminant

        Gel Decontaminant

        CBI Polymers’ DeconGel™ decontaminates a broad range of surfaces, including concrete, steel, painted or unpainted, glove boxes, hoods, and casks. The gel’s binding properties trap and encapsulate a wide spectrum of radioisotopes and chemicals in a simple, no-preparation process. Users simply apply, let dry, and peel, and the dried film containing the contaminants can be disposed of according to appropriate regulations.

          Oldcastle Precast

          Oldcastle Precast Wind Turbine Foundation

          Modular Wind Turbine Foundation

          Oldcastle Precast’s Cell Block™ is a precast modular foundation for small and community wind turbines. It has a precast post tensioned-block system that can be assembled in various configurations onsite with minimal site preparation. The modules are non-ground penetrating, making them perfect for use where ground penetration is either not allowed, such as landfill or environmentally sensitive applications, or impractical due to hard-to-penetrate ground conditions.

            Forston Labs

            Forston Labs Spectrophotomer and Fluorometer

            Spectrophotometer and Fluorometer

            Forston Labs’ NavSpec™ Plus Spectrophotometer and Fluorometer allows the user to collect a full wavelength spectrum (absorbance, percent transmittance, or intensity) in less than one second. Once the peak wavelength is determined, the user can determine the concentration of a solution or monitor rates of reaction. The optical range is 380 to 950 nm (VIS-NIR), and the meter has an optical resolution of 2.5 nm.

              Advanced Drainage Systems

              Leaching Chamber

              Leaching Chamber

              ADS’s 36LP is a plastic leaching chamber designed for challenging installations, such as those in high groundwater conditions or with other site restrictions. The chamber’s 20-degree integral articulating joint works in straight or contoured septic leach field applications. The product incorporates a “lock and drop” joint that provides a more positive connection during installation and backfill, and also features a universal inlet/outlet end cap, two inspection vent ports with easy-to-remove knockouts and diamond plate texture for slip resistance.

                AMS

                Direct Push System

                Direct Push System

                AMS’s PowerProbe 9100-SK direct push system is portable, maneuverable, and versatile. The rugged rubber tracks keep the unit moving when soil conditions get soft, wet, or muddy, with minimal disturbance to the worksite. The probe can be easily removed to allow use of the carrier vehicle and accessories, such as the bucket, pallet forks, and backfill blade. The machine also features a powder-coated finish, anodized metal power track, spring-loaded pull yoke, and a 50 ft-lb hydraulic hammer.



                  Midac Corp.

                  MIDAC Infrared Spectrometer

                  Infrared Spectrometer

                  MIDAC’s open path Fourier transform infrared spectrometers can measure extreme path lengths, which enables users to analyze methane, carbon dioxide and nitrous oxide with up to single-digit ppb detection limits. A 60-inch source array sends an infrared beam to a receiving telescope that can be more than a kilometer away; the spectrometer measures the air between them.

                    Assmann Corp.

                    Full Drain Outlet

                    Full Drain Outlet

                    Assmann’s molded-in full drain outlet assembly for tanks that are 2,500 gallons and larger enables operators to empty the vessel without using mechanically installed nozzles. The assembly can be used where heavy solids or salts may accumulate in the bottom of the tank. It is available in 3 inches and 4 inches, as well as in variations of 316 stainless steel, titanium and hastelloy construction.

                      Pepperl+Fuchs

                      Pepperl Fuchs Diagnostic Module Software

                      Diagnostic Module Software

                      Pepperl+Fuchs’ Advanced Diagnostic Module DTM software monitors the quality of fieldbus communication for FOUNDATION fieldbus H1 and PROFIBUS PA networks, and includes updates that speed fieldbus commissioning. This smart software tool translates data provided by the ADM into actionable information. It can run on a server in the control room, turning the complete fieldbus infrastructure into an open book that can be read even without expert knowledge.

                        Kimberly-Clark Professional

                        Kimberly Clark Professional Wypall

                        Absorbent Cloth

                        Kimberly-Clark Professional’s WypAll X90 cloths provide 75 percent more oil absorption and 35 percent more water absorption than WypAll X80 wipers. The product is ideal for heavy wiping, prepping surfaces with solvents, and cleaning metal shavings and rough surfaces. The cloths are manufactured with hydro-entangling polyester fiber for softness and oil absorbency, and wood fiber for water absorbency.

                          BioAir Solutions

                          Compact Odor-control System

                          Compact Odor Control System

                          BioAir Solutions’ EcoPure® Mini is a compact dual-technology odor control system that uses the company’s EcoBase™ structured, synthetic biotricking filter media. It eliminates hydrogen sulfide and volatle organic compounds without using hazardous chemicals. The system can handle airstreams ranging from 50 to 1,000 cfm and comes pre-installed on a stainless steel skid, making installation possible in less than a day.

                            Moyno

                            Metering Pump

                            Metering Pump

                            Moyno Inc.’s metering pump has enhanced pumping elements and VFD/motor controls that expand the scope of application and optimize economical and efficient performance, particularly when dosing, sampling, and metering low-flow liquids. The VFD/motor controls improve metering accuracy and repeatability. The pump’s progressing cavity design results in a flow free from pulsation and variation in velocity and volume, which prevents waste and mixture imbalance.

                              Hydro-Guard

                              Hydro Guard Flushing System

                              Flushing System

                              Hydro-Guard’s telemetry controlled, SCADA compatible, S.M.A.R.T Flushing System is designed for maximum water conservation as well as two way/real-time management and water quality improvement. One operator can manage multiple sites throughout a distribution system remotely, viewing data feeds and communicating with each site in virtual real time. The system flushes water distribution lines when the residual level drops below the user-defined disinfectant level; on a pre-set schedule by selecting day(s) of the week, time of day duration of flush; at the most convenient times for customers; and with the least amount of discharged water possible

                                Free e-News Subscription

                                I agree to this site's Privacy Policy