Environmental Protection

Analysis / Analytical Instruments


Electro-Chemical Devices, Inc.

Seawater Dechlorination Analyzer

Seawater Dechlorination Analyzer

Seawater Dechlorination Analyzer

The Model DCA-23 Seawater Dechlorination Analyzer from Electro-Chemical Devices (ECD) is a low maintenance measurement solution that requires no chemicals to monitor seawater chlorine levels accurately in a wide range of industrial process and municipal water treatment applications.

Seawater has multiple process industry uses, including heat exchange systems at LNG terminals, oil/gas refineries, electric power plants and SWAC systems (salt water air conditioning) in commercial buildings. The DCA-23 is a single-purpose analyzer that monitors chlorine in seawater from 0.0 to 2.00 ppm. It features an economical, low-maintenance design that requires no chemicals.

The analyzer measures the pH, temperature, and Total Residual Oxidant (TRO) of seawater and converts them into an equivalent ppm chlorine value, which is displayed to conform with existing conventions. It features a minimum detection limit (MDL) of 0.014 ppm and a limit of quantification (LOQ) of 0.044 ppm, making the DCA-23 Analyzer suitable for monitoring in environments with the most stringent dechlorination regulations.

The DCA-23 features three sensors, pH, TRO and temperature. The pH sensor measures from 0-14 pH, the TRO sensor measures from ±1500 mV and the temperature sensor measures from 0-100°C.  The DCA-23 with its tri-parameter monitoring, is the ideal seawater chlorine analyzer for a wide range of applications.


    FilterSense

    The FilterSense Model PM 100 is a multi-channel particulate monitor.

    Model PM 100

    Model PM 100

    htttp://www.filtersense.com


      Control Co.

      Traceable Digital Thermometer

      Control Company's Traceable Digital Hygrometer/Thermometer/Dew Point instrument provides a response time of under 10 seconds with a resolution of 0.01% RH, 0.01°F/°C, and 0.01° dew point °F/°C. It samples one-and-a-half times per second. Results are reported in both °F and °C from –40.00 to 220.0°F (–40.00 to 104.0°C) temperature, and from –40.00 to 140.0°F (–40.00 to 60.00°C) dew point. Temperature resolution is 0.01° with an accuracy of ±0.4°C. High and low alarms can be programmed in dew point/frost point, temperature, and humidity. When an out-of-range condition is sensed, an alarm sounds and the display flashes. Computer output permits data to be captured, transferred, stored, and printed. Memory recalls both minimum and maximum readings in dew point/frost point, temperature, and humidity at any time.

        Fluid Imaging Technologies

        FlowCAM PV

        Fluid Imaging Technologies' FlowCAM PV Series imaging particle analysis system features two new analyzers, the FlowCAM PV-5x and FlowCAM PV-10x,  that are pre-configured to promote maximum speed, efficiency, accuracy and repeatability in laboratories where analyses are performed on products and/or on particles. The analyzers can detect thousands of particles and microorganisms, in a sample, in less than a minute, and take a hi-resolution, full color digital image of each one detected while measuring them based on the actual size and shape of the images and characterizing them with up to 32 different parameters - all in real-time.

          GF Piping Systems

          Signet 9900 SmartPro Transmitter

          GF Piping Systems' Signet 9900 SmartPro Transmitter provides a single-channel interface for multiple parameters. The single-channel, multi-parameter capability and field-upgradable modularity allows distributors and OEMs to increase service levels while maintaining reduced inventories. A key feature is its extra large (3.90" x 3.90") backlit display. The display shows separate lines for units, main and secondary measurements as well as a dial-type digital bar graph. Other capabilities include relay and warning LEDs and an intuitive menu for easy programming. Optional modules include relay, direct conductivity/resistivity, HART Communications (H COMM), and a PC configuration tool (PC COMM). Offered in both panel and mount versions. Its multi-parameter and modular capabilities make the unit well suited for a variety of applications including water and wastewater treatment, reverse osmosis, deionization, chemical dosing and delivery, metal and plastic finishing, fume scrubbers, cooling towers, and all types of filtration.

            Hayward Flow Control Systems

            EPM-4 and EPM-6

            The EPM-4 and EPM-6 models are the latest editions to the EPM Series of quarter-turn reversing electric actuators. The EPM-4 and EPM-6 are designed to eliminate wiring errors, increase reliability and provide simplicity during installation. The EPM-4 provides a torque output of 455 in-lb./ 50 Nm, and the EPM-6 an output of 600 in-lb./67 Nm. Both models feature a robust gear train design and modular construction, as well as a NEMA 4/4X enclosure. Additional features include aluminum alloy dry powder coated housing, internal low power heater, four limit switches (2 Auxiliary), ISO5211 F07 mounting pattern, data logging and diagnostics,(proportional control only) for EPM-6 and CSA listed.

             


              GF Piping Systems

              Chlorine Analyzer

              Chlorine Analyzer

              The Signet 4630 Free-Chlorine Analyzer System from GF Piping Systems is designed with amperometric sensing technology that incorporates a clear flow cell, flow regulator, sensors, filter and rotameter all in one compact unit.  The fully integrated system provides a turnkey solution for accurately measuring free chlorine. The analyzer features pre-wired electronics, a 120 VAC power plug, two 4 to 20 mA outputs and two mechanical relays. It also offers the ability to have manual or continuous pH compensation that allows for highly accurate free chlorine readings.

               


                ANDalyze Inc

                AND1000 Fluorimeter

                The AND1000 Fluorimeter enables field testing in two short steps, eliminating or significantly reducing test expenditures, complexity and wait times experienced in traditional heavy metal water testing. ANDalyze's proprietary catalytic DNA sensors use a DNAzyme reaction that fluoresces in the presence of a target contaminant substance such as lead, uranium, copper and mercury. The fluorescence of the reaction is dynamically measured to determine the concentration of the target heavy metal at levels in the low parts per billion (ppb).



                  Parker Hannifin Corporation

                  THM Analyzer

                  Parker Hannifin Corporation’s THM Analyzer is an on-site analytical system that measures trihalomethane (THM) concentration at ppb levels in less than 30 minutes. It  is an integrated Purge-and-Trap Gas Chromatograph (GC) that can help operators optimize water treatment at the plant and evaluate water age in the distribution system for improved control over the formation of THMs. The THM Analyzer was designed for high-precision, high accuracy measurement of THM and offers a full complement of calibration and quantization routines. Analyzer calibration is streamlined with detailed menu options, while push-button operation provides sample purging, THM component separation, and data analysis.

                    Emerson Process Management

                    Emerson Process Management Rosemount WQP

                    Rosemount Analytical WQP Systems

                    Emerson’s Rosemount Analytical WQP Systems measure in real time fluoride, ammonia, ammonia and monochloramine, and ammonia and fluoride together. The systems are reagent- and pump-free, reducing both the initial cost and maintenance, and they are based on ion monitoring technology. Their menu-driven industrial ion selective analyzer is capable of calibrating, outputting, displaying and controlling in ppm units. The systems come pre-configured, pre-calibrated and qualified to install, plug in, and immediately place in service.

                      real hi pure UV254

                      Real UV254 Hi-Pure / Security Online Monitor

                      Real Tech’s Real UV254 Hi-Pure / Security Online monitors detect trace amounts of organic contamination in finished drinking waters and high-purity waters in real time. The monitors use the company’s Split-Sense Pro technology to provide sensitivity and reliability at a fraction of the cost of alternative organics monitors, such as TOC. The U.S. EPA National Homeland Security Research Centre’s Technology Testing and Evaluation Program recently evaluated the product and found it had great success at detecting accidental/intentional contamination events in drinking water distribution systems. The monitor also has applications in ultrapure industrial processes.

                      Midac Corp.

                      MIDAC Infrared Spectrometer

                      Infrared Spectrometer

                      MIDAC’s open path Fourier transform infrared spectrometers can measure extreme path lengths, which enables users to analyze methane, carbon dioxide and nitrous oxide with up to single-digit ppb detection limits. A 60-inch source array sends an infrared beam to a receiving telescope that can be more than a kilometer away; the spectrometer measures the air between them.

                        Forston Labs

                        Forston Labs Spectrophotomer and Fluorometer

                        Spectrophotometer and Fluorometer

                        Forston Labs’ NavSpec™ Plus Spectrophotometer and Fluorometer allows the user to collect a full wavelength spectrum (absorbance, percent transmittance, or intensity) in less than one second. Once the peak wavelength is determined, the user can determine the concentration of a solution or monitor rates of reaction. The optical range is 380 to 950 nm (VIS-NIR), and the meter has an optical resolution of 2.5 nm.

                          Nextteq

                          Sulfide Ion Detector Tubes

                          The Gastec Sulfide Ion in Solution Detector Tube No. 211 from Nextteq detects sulfide ion levels in solution. With the easy-to-use system, direct-reading tubes produce a quantitative color-stain that quickly pinpoints problem areas in two to three minutes. The calibration scale, printed directly on each tube, provides on-the-spot results. The Gastec sulfide ion tube requires no color comparison chart or laboratory equipment to determine results. The colorstain ends with a clearly defined line of demarcation to further eliminate confusion.

                            Electro-Chemical Devices

                            Electro-Chemical_Devices_Universal_Toroidal_Sensors

                            Universal Toroidal Sensors

                            Electro-Chemical Devices' Universal Toroidal Sensors measure multiple individual liquid parameters for industrial process and manufacturing operations. The ECD Models S10 and S17 measure pH, ORP, DO, Resistivity and Conductivity. The sensors feature a small diameter configuration design and support applications in many industries. Model S10 is an immersion or insertion sensor, and the S17 is a valve retractable sensor. The sensors have a 0.75-inch diameter PVDF body and a universal diameter that can fit into existing devices without needing to re-plumb the flow cell.

                              Free e-News Subscription

                              I agree to this site's Privacy Policy