Environmental Protection

Structures


AMS

Direct Push System

Direct Push System

AMS’s PowerProbe 9100-SK direct push system is portable, maneuverable, and versatile. The rugged rubber tracks keep the unit moving when soil conditions get soft, wet, or muddy, with minimal disturbance to the worksite. The probe can be easily removed to allow use of the carrier vehicle and accessories, such as the bucket, pallet forks, and backfill blade. The machine also features a powder-coated finish, anodized metal power track, spring-loaded pull yoke, and a 50 ft-lb hydraulic hammer.

    Oldcastle Precast

    Oldcastle Precast Wind Turbine Foundation

    Modular Wind Turbine Foundation

    Oldcastle Precast’s Cell Block™ is a precast modular foundation for small and community wind turbines. It has a precast post tensioned-block system that can be assembled in various configurations onsite with minimal site preparation. The modules are non-ground penetrating, making them perfect for use where ground penetration is either not allowed, such as landfill or environmentally sensitive applications, or impractical due to hard-to-penetrate ground conditions.

      Russelectric

      Russelectric_Bypass_Isolation_Switches

      30-cycle Bypass/Isolation Switches

      Russelectric RTS Series Bypass/Isolation Switches are UL labeled and listed for 30-cycle closing and withstand ratings based on testing per UL Standard 1008. Available in continuous current ratings from 100 to 3,000 amps, these switches simplify the selective coordination of overcurrent devices in backup power systems for healthcare and other mission-critical facilities. The 30-cycle rating allows downstream overcurrent protective devices to clear a fault before upstream devices.

        MATCOR

        Matcor MMP-X Direct Drive Anode

        Anode

        The MMP-X Direct Drive Anode from MATCOR is a prepackaged mixed metal oxide structure designed to be pushed into soft soil, mud or sand. The unit features a driving cone and a driving assembly, and the anode is packaged with carbon backfill in a gauge steel canister. The product is available in five canister lengths and is designed to protect pipelines, storage tanks, sheet pile walls, structural piles and other buried structures.

          Jade Engineered Plastics Inc.

          Stock Bearing Shapes

          Jade’s JLON PTFE stock bearing shapes imbed into shafts, creating a surface interface. The shapes feature four wear-resistant formulations with no water absorption and are offered in 3.8- to 36-inch O.D. sizes. The products are available in the 2100, 4200, 5500 and 7000 models.

            SafeRack

            Gangway

            SafeRack’s G4 Series single-hatch truck-loading gangway is a self-contained system constructed with metal-stamping technology and a tool-and-die process. The product features spring-loaded gangway and platform operation, slip-resistant tread on the stairs, powder-coated handrails and mid-rails, heavy-duty bumpers and a four-rail design for fall protection.

              EXAIR Co.

              Conveyor

              EXAIR’s Heavy Duty Threaded Line Vac Conveyors convert piping to a conveying system for steel shot, metal parts, scrap, and trim bulk materials. Designed for rugged, industrial applications, the device has a hardened alloy construction. The conveyors eject a small amount of compressed air through directed nozzles to produce a vacuum on one end with high output flows on the other.

                Elastec

                Medical Waste Incinerator

                Elastec/American Marine’s MediBurn30 portable medical waste incinerator features dual-chamber combustion, under-air technology and modulating burners. The product contains a redesigned electronics suite with a multilingual user interface, and a door lock and sensor to prevent accidents. The 2,440-lb. unit is designed for use in laboratories, small hospitals and medical clinics and disaster relief operations.



                  Geoprobe Systems

                  Direct Push Machine

                  The Model 7822DT subsurface machine from Geoprobe Systems has direct push functions and geotechnical capabilities. Features include a GH64 hammer with modular percussion power cell technology and integrated two-speed bidirectional rotation. The rear stabilizer contains a drop rack system, which allows operators to move accessories and tools weighing up to 2,000 lbs. Three auxiliary hydraulic power ports can be controlled by an operator via the control panel.

                    Advanced Drainage Systems

                    HDPE Grease Interceptor Tank

                    Advanced Drainage Systems' grease interceptor tank design meets ASTM’s new standard, ASTM F2649 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks. The ADS tanks provide a watertight and long-life system that can be designed to resist the heated, corrosive discharges found in food waste. Ready to install, the tanks are available in 750-, 1,000-, 1,500-, and 2,000-gallon capacities.

                    Grease interceptor tanks are installed between a commercial kitchen and the sanitary sewer system to prevent grease from conveying to sanitary sewer plants.

                    ADS developed its line to help food service facilities meet EPA requirements. Each tank is designed to accept most discharges associated with commercial food preparation.


                      Fibox

                      Enclosures

                      The ARCA® JIC enclosure family, from Fibox, has been tested and certified by SGS FIMKO to comply with the European Community's Low Voltage Directive and permits use of the CE Mark.

                      CE conformity is required for importation of electrical equipment into the European community.

                      ARCA enclosures were evaluated against EN 60529 and EN 62262, achieving ingress ratings of IP66 / IP67 and an impact rating of IK09.

                      The line consists of 10 standard JIC enclosure sizes ranging from 6 x 6 x 4” D to 18 x 16 x 10” D and is available in over 100 configurations of opaque or transparent screw cover or hinged latched cover versions. This size range targets OEM instrumentation, controls, and automation applications.


                        Assmann Corp.

                        Base Container BC450

                        Assmann Corp. of Garrett, Ind., introduces the Base Container BC450 double-wall rectangular, low profile, chemical storage tank for various material handling applications. The primary tank holds 450 U.S. gallons and allows intermediate bulk containers (IBC) to be quickly emptied and back on the road, offering savings on container rentals and storage space. The intermediate bulk container is placed on top of the BC450 to drain. The BC450 is constructed from rugged, durable crosslink polyethylene or FDA-approved and NSF-certified linear polyethylene.

                        The new base container is designed to hold chemical tote bins for up to 3½ hours and offers a partially sloped bottom for near complete draining from top suction.


                          Free e-News Subscription

                          I agree to this site's Privacy Policy