Turbo X-Treme Aerator
The Turbo X-Treme Aerator is a high-efficiency, floating/surface aerator, powered by an energy-saving 25 h.p. motor. It incorporates a “turbo” blower to achieve high-capacity water movement with maximum aeration and mixing incorporated in a discharge manifold. During operation, it raises the dissolved oxygen level in the water (in ponds, lagoons, etc..) while providing high-capacity water movement. The aerator is ideal for a wide variety of applications, including municipal, industrial, agricultural and disaster recovery. It is made of stainless steel, and carries a one-year warranty.
Luba GL is a lightweight rooftop solar hot air collector for supplemental outside air heating in commercial, institutional and industrial facilities. Luba GL technology boasts a maximum thermal output of 247-BTU/h/ft2 (780-watts/m2) and airflow of 6 to 12-cfm per 112 (L) x 36 (H) x 8 (D)-inch collector. It features a lightweight twin-wall, 1/4-inch-thick (10-mm) polycarbonate glazing and 26.4-square-foot (2.5-square meter) black aluminum backpanel. The patented Luba GL's backpanel perforations transpire air from outside to within the collector from the backside, which reduces heat loss and eliminates the weight and cost of insulation used in other collectors.
TreeFrog by National
TreeFrog by National paper used for environmentally friendly and sustainable envelopes has absolutely no wood or wood fibers used in the manufacturing process. Instead, the paper is made from a 100 percent sugar cane byproduct called bagasse. Additionally, no sugar cane is harvested specifically to produce this paper. The by-product is diverted from land filling or burning, making it a truly eco-friendly option. Sugar cane can be harvested twice a year, making it a renewable paper source.
Amended Silicate is the first commercially available, non-carbon reagent for removing mercury (greater than 90%) from the flue gas stream of coal-fired power plants. Amended Silicates uses a natural mineral compound as its base component, which reduces emissions and energy during the manufacturing process. A significantly reduced carbon footprint is realized versus the manufacture of more traditional mercury capture products, such as powder activated carbon.
LED Green Power Product Module
Philips GreenPower LED Production Module is a light fixture for commercial growers and horticultural researchers. The Philips Horticultural LED Grow Light is available in an UL-approved 110-volt version in the United States. The waterproof Production Modules come in two lengths 120 cm (about 4 feet) and 150 cm (about 5 feet). The modules are available in Deep Red/Blue (general light good for a variety of growing applications) and Deep Red/White (if work light is needed). At between 35-43 watts, the modules can replace many T5 or T8 fluorescent grow light applications and greatly reduce energy consumption.
Acoustic Bubble Spectrometer
Generation II of the ABS Acoustic Bubble Spectrometer (ABS) is for the measurement of bubble size distributions and void fractions in gas/liquid mixtures. It can be used in a wide variety of applications requiring the monitoring of the bubble population such as aeration, bioreactor, oceanography, chemical engineering, cavitation studies, biological media, food processing, etc. The data sampling rate has been increased nearly five folds, which expands the bubble detection limit below 10 microns radius. All the hardware external to the processing computer has been integrated in one box; and a laptop configuration is now available using an Express Card port.
Saint-Gobain Performance Plastics' (SGPPL) critical connections solutions for residential water treatment applications, include ultra-violet sterilization and water transfer. SGPPL’s solutions include the Chemfluor range of flexible high-strength tubing for use in UV sterilization systems. High-clarity Chemfluor heat-shrink tubing offers protection for the quartz sleeve that surrounds and shields the UV lamp, while maintaining clarity and ensuring UV light transmission. SGPPL’s offers a range of critical connections solutions that incorporate Tygon tubing to connect both UV sterilization and water filtration systems to residential networks.Tubing solutions are made of plastics that are FDA-approved for food use, and/or adhere to NSF/ANSI Standards 51 and 61.
New Pig Corp.
Well Pad Liner
Designed to cover drill sites and help protect workers and the environment, the PIG Well Pad Liner’s high-traction surface minimizes slip-and-fall-injuries and absorbs nuisance leaks, drips and spills on contact. A strong, single-layer liner, 4X stronger and 2X more puncture-resistant than standard HDPE liners, plus an embedded barrier film within the liner, helps prevent major spills from reaching the ground. UV resistant, its 100 percent polypropylene, single-layer construction, heat-fused and needle-punched, will not pull apart when walked on or driven over. Weldable and sealable for easy installation, and incinerable to reduce waste.
TUFF Air Sampling Pumps
Casella CEL offers its TUFF line of personal air sampling pumps that feature a sealed case with over-molding that protects it from damaging moisture, extreme temperatures, solvents, and impact. Pumps possess a flow range from 5 ml/min to 4.5 l/min, and incorporate a double-acting diaphragm mechanism with digital control. Pump operation is guided by an intuitive user interface displaying real-time flow, sampled volume with run duration, a simple battery "fuel gauge" and alarm for flow or battery fault conditions. Typical run times of more than 30 hours (depending on media and flow rate) and meet applicable NIOSH and EN requirements.
CNIguard Intrusion Detection System
CNIguard intrusion detection system is designed to protect access points in drinking water distribution systems against the threat of intentional contamination. The system utilizes a patented Smart Sensing Technology to detect tampering such as drilling, grinding and cutting; while virtually eliminating costly false alarms. The computerized system can distinguish between real threats and common occurrences such as heavy rain, hail, etc. and is rated for a maximum of one false alarm per year. CNIguard does not rely on human interpretation to determine if a threat is real.
Dürr Environmental Inc.
Selective Catalytic Reduction (SCR) Systems are designed for for high combustion temperatures of over 1100 °C in the combustion chamber (thermal NOx), and if nitrogen is contained in the fuel (fuel NOx). It is a reducing agent injected into the flue gas at temperatures of 260 to 390 °C. Suitable substances are, depending on customer's requirements, gaseous ammonia, ammonia water or urea. The subsequent process is the selective conversion of NOx and NH3 and/or NH2 (as the case may be) to N2 and H2O.
Electro-Chemical Devices' series of sensors for chlorine analysis fit into chlorine monitoring systems in a wide variety of aqueous environments. The FCA-22 Free Chlorine Sensor, TCA-22 Total Chlorine Sensor and CDA-22 Chlorine Dioxide Sensor are high-accuracy amperometric sensors for fresh water applications including monitoring of industrial cooling and rinse water, drinking water and wastewater. All chlorine sensors are also available as turn-key panel mount systems, featuring a simple “plumb-and-play” design combined with ECD’s C22 Analyzer/Controller.
The WWETCO FlexFilter is a simple gravity system with a robust design as a high-rate compressible media filter. The influent liquid applies a hydrostatic force to the compression bladder causing the media to compress. It uses a synthetic compressible media to capture solids in the high-rate filtration process. The combination of tapered media compression, porosity gradient with the media bed and a low flow backwash system make the WWETCO a versatile filer.
The Multi-Cal ISE system allows the user to store multiple calibration ranges in the laboratory and then retrieve them for use as needed in the field. The Multi-Cal kit provides from two to four calibration ranges and the LabNavigator monitors up to four ISE's simultaneously. The handheld LabNavigator with Multi-Cal for ISE provide multi-range, immediate, spot-on, field chemical analysis. Multi-Cal kits are available for Nitrate, Ammonium, pH, Calcium, and Chloride with others on request.
110 Gallon Trapper
EXAIR's 110 Gallon Chip Trapper removes solids such as chips, swarf and shavings out of used coolants and other liquids with its compressed air power. It vacuums the dirty coolant or liquid into the included 110 gallon drum; while trapping all the solids in a reusable filter bag. There are no motors or impellers to clog or wear out. It features a built-in pressure/vacuum relief and an automatic safety shutoff to prevent spills or overfilling.