EHC-L by Adventus, is a cold-water soluble formulation of EHC that is specially designed to be emplaced via existing wells and/or hydraulic injection networks for the treatment of a wide range of groundwater contaminants. . EHC-L is a stable, buffered, micro-emulsion of slow-release, food-grade carbon (lecithin), ferrous iron and a redbox buffer (cysteine). EHC-L is designed for on-site dilution with cold water and subsequent application via screened wells or direct push technology for the treatment of compounds amenable to reductive transformation, including chlorinated hydrocarbons and some dissolved heavy metals. It generates both biotic and abiotic reductive mechanisms and capitalizes on synergies between the two.
The AND1000 Fluorimeter enables field testing in two short steps, eliminating or significantly reducing test expenditures, complexity and wait times experienced in traditional heavy metal water testing. ANDalyze's proprietary catalytic DNA sensors use a DNAzyme reaction that fluoresces in the presence of a target contaminant substance such as lead, uranium, copper and mercury. The fluorescence of the reaction is dynamically measured to determine the concentration of the target heavy metal at levels in the low parts per billion (ppb).
GF Piping Systems
The Signet 4630 Free-Chlorine Analyzer System from GF Piping Systems is designed with amperometric sensing technology that incorporates a clear flow cell, flow regulator, sensors, filter and rotameter all in one compact unit. The fully integrated system provides a turnkey solution for accurately measuring free chlorine. The analyzer features pre-wired electronics, a 120 VAC power plug, two 4 to 20 mA outputs and two mechanical relays. It also offers the ability to have manual or continuous pH compensation that allows for highly accurate free chlorine readings.
BioBarrier Membrane BioReactor utilizes flat sheet membranes for a versatile design and robust process in wastewater recycling. Engineered in a small footprint and immersed directly in the aeration process, the BioBarrier has a high surface area of membrane material in a double plate configuration. Treated water moves through the pores to the space between the films; a pump then extracts the clean water to discharge into the environment. BioBarrier removes biological along with E. Coli and fecal coliform without add on disinfection.
Bio-Mod Modular Bioretention System
The Bio-Mod Modular Bioretention System is a modular pre-cast concrete bio-filtration cell system developed to add consistency to design and construction, with features to enhance filter performance, structural integrity, reduced construction and on-going maintenance costs. Designed for use with local agency bioretention cell designs, Bio-Mod is compatible for use with all types of filter soils, including non-proprietary low-flow (5 to 10 inches an hour) or high-flow soils.
Hi-Flo ES is a high-efficiency ASHRAE grade pocket filter that uses 27 to 50 percent less HVAC energy and has 25 to 30 percent longer service life than competitive filters. ASHRAE grade pocket filters combine three factors critical to commercial buyers – low total cost of operation, longer service life and the ability to operate without a prefilter. Key to the performance of the Hi-Flo ED is a high-lofted, air laid micro fiberglass media and a unique pocket configuration.
The WWETCO FlexFilter is a simple gravity system with a robust design as a high-rate compressible media filter. The influent liquid applies a hydrostatic force to the compression bladder causing the media to compress. It uses a synthetic compressible media to capture solids in the high-rate filtration process. The combination of tapered media compression, porosity gradient with the media bed and a low flow backwash system make the WWETCO a versatile filer.
The Multi-Cal ISE system allows the user to store multiple calibration ranges in the laboratory and then retrieve them for use as needed in the field. The Multi-Cal kit provides from two to four calibration ranges and the LabNavigator monitors up to four ISE's simultaneously. The handheld LabNavigator with Multi-Cal for ISE provide multi-range, immediate, spot-on, field chemical analysis. Multi-Cal kits are available for Nitrate, Ammonium, pH, Calcium, and Chloride with others on request.
Vadose Organic Substrate (VOS)
The Vadose Organic Substrate features bioremediate chlorinated solvents in the unsaturated soils. The technology allows the thixotropic gel to form a stable oil/water suspension that remains in situ after injection. This suspension provides an anaerobic environment in the vadose zone with the appropriate nutrients for the microbes to remediate recalcitrant compounds, such as chlorinated compounds.
110 Gallon Trapper
EXAIR's 110 Gallon Chip Trapper removes solids such as chips, swarf and shavings out of used coolants and other liquids with its compressed air power. It vacuums the dirty coolant or liquid into the included 110 gallon drum; while trapping all the solids in a reusable filter bag. There are no motors or impellers to clog or wear out. It features a built-in pressure/vacuum relief and an automatic safety shutoff to prevent spills or overfilling.
New Pig Corp.
Well Pad Liner
Designed to cover drill sites and help protect workers and the environment, the PIG Well Pad Liner’s high-traction surface minimizes slip-and-fall-injuries and absorbs nuisance leaks, drips and spills on contact. A strong, single-layer liner, 4X stronger and 2X more puncture-resistant than standard HDPE liners, plus an embedded barrier film within the liner, helps prevent major spills from reaching the ground. UV resistant, its 100 percent polypropylene, single-layer construction, heat-fused and needle-punched, will not pull apart when walked on or driven over. Weldable and sealable for easy installation, and incinerable to reduce waste.