Thermo Fisher Scientific Inc.
Dionex ICS 4000 Capillary HPIC Ion Chromatography System
Dionex ICS 4000 Capillary HPIC Ion Chromatography System
The high-pressure Dionex ICS-4000 Capillary HPIC Ion Chromatography System delivers best-in-class sensitivity from routine analysis of ionic compounds to your most demanding application challenges. The system combines high-pressure capabilities at capillary flow rates with Reagent-Free operation and versatility in detection selection, with all of the advantages of capillary IC, including high mass sensitivity, low eluent consumption, low waste generation, and extended consumable lifetimes.
Peroxides Prevention Product
XPell, a product that indicates and prevents the formation of peroxides in organic solvents, removes the need for periodic testing and disposal of peroxide-forming solvents. Use of this inorganic material improves laboratory safety, helps to prevent peroxide-related explosions/accidents, and extends the life of solvents. It is designed for university chemistry labs, analytical labs, pharmaceutical labs, pharmaceutical manufacturers, research labs and hazardous waste disposal company applications.
Mettler Toledo’s LabX 2010 software release supports XP and XS Balances as well as the new line of the company's density meters and refractometers. The software’s One Click application solutions help users perform routine tasks with a single touch of the instrument dynamic display. The software manages the entire application including automatically performing all calculations, guiding users through the workflow and report generation. It also has the capacity for secure data storage and data export/import with full regulatory compliance, if required.
Traceable Dissolved Oxygen Pen
Control Company’s Traceable Dissolved Oxygen Pen has a tough ABS plastic housing and water-resistant design with o-ring seal and membrane keypad to ensure a long life in severe lab or harsh plant environments. The hold button freezes the reading on the display. The high contrast, easy to read 3/8-inch-high LCD digits simultaneously display oxygen concentration and temperature. The unit recalls minimum/maximum readings at the press of a button.
Control Company’s Traceable Conductivity/TDS/Salinity Meter is equipped with chemical-resistant waterproof ABS plastic housing. The device contains LCD digits and a dual-display that shows readings and temperatures. Temperature compensation allows readings to be automatically referenced to the international standard of 25 degrees Celsius, or the user can set a programmable temperature coefficient.
Modular SFC’s Centrifan Recirculating Evaporator works without a vacuum pump. The standalone device uses gas flow created by a spinning rotor and heater to accelerate the evaporation of aqueous and organic solvents. The blow drying continuously sheers off the top layer of liquid, while the centrifugal force holds non-volatile compounds in place. The unit is designed to save energy and laboratory space, and eliminate oil cleanups, heat, noise and vacuum tubing.
Strobic Air Corp.
The patent pending Strobic Air® Smart Fan™ maintains safe ventilation levels while minimizing facility energy costs and carbon footprint. It is designed for use in “safety critical” applications such as laboratory fume hood exhaust and ventilation for specialized care environments like airborne infection isolation rooms. The device, which uses a combination of sensors and controls, continually adjusts fan speed to produce optimal flow. It also can sense failure and turn on a “stand by” fan to maintain safe exhaust operations.
Humidity and Temperature
The HTZ Smart HART®
Humidity and Temperature Transmitter from Moore Industries simultaneously measures temperature and humidity in closely monitored processes, such as those found in clean rooms, assembly areas, and storage facilities at pharmaceutical, semiconductor, food processing, and biotechnology facilities. HART communications allows the unit to be programmed or queried from any point along one of the transmitter’s dual 4-20mA loops. Accuracy of the relative humidity measurements is up to ±0.75%RH, the temperature measurements is up to ±0.036°C, and the dewpoint calculation is within ±0.5°C.
The Grabner Miniflash is US D.O.T.-approved for the transportation classification of solids and liquids. The technology (ASTM D6450 & D7094) replaces older, methods like Pensky Martens (D93) and TAG (D56). It uses no open flames, and the 1.0 mL sample size is ideal for small test batches, which practically eliminates hazardous fumes and dramatically reduces laboratory wastes. Temperature ranges from: -25° to 400°C (-13° to 750°F). The unit is lightweight and portable and can be powered from a vehicle battery for both on-site and laboratory applications.
Liquid Handling Pumps
Cheminert Model M6 and M50 Liquid Handling Pumps are a new generation of pumps for precision handling of liquids and/or gases, producing a bidirectional pulseless flow with a range of over six orders of magnitude. These positive displacement pumps have no separate fill cycle, and the capacity is unlimited. RS-232 and RS-485 communication protocols are incorporated into the microprocessor-driven controller. (USB interface requires an adapter.) The included software package controls flow rates, flow direction, and metered volumes.
VICI Metronics Inc.
Model 150 Dynacalibrator®
VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations.
A passivated Inertium® coated stainless steel permeation chamber houses the permeation device(s), with measured inert carrier gas sweeping the calibration gas/vapor from the chamber. The digital temperature controller maintains the chamber temperature at a setpoint with an accuracy of ±0.01°C, traceable to NIST standards. Reduced flow path volume permits low concentration generation of mercury, water, and other difficult-to- work-with materials.
Teledyne Leeman Labs
Teledyne Leeman Labs of Hudson, N.H., a manufacturer of analytical instrumentation for elemental analysis, has released the Hydra IIAA Automated Mercury Analyzer.
This product has low, 1 ppt detection limits, fast sample throughput, and high capacity. Its 270-position autosampler will enhance the productivity of any laboratory involved with mercury analysis. The unit incorporates new software that automates the analytical process from Method Development to Final Report Generation. Help is provided in the software including scheduled maintenance and audio/visual tutorials.
This analyzer also can be upgraded to direct solids analysis.
Brinkmann Instruments Inc.
Metrohm ProcessLab Analyzer
Brinkmann Instruments, Inc. introduces the Metrohm® ProcessLab, a fully customized, at-line automation analyzer. The system uses proven hardware and software, including micro sample loops, overflow pipettes, pumps, valves, stirrers, and Dosinos®. Modular, compact, and robust design allows for installation at the process line, pilot plant, or laboratory. Hermetical separation of electronics protects the unit against dust and liquids. Industrial PC- and PLC-driven controller allows for extensive communication within a process environment. The unit carries out analyses including pH, acid value, chloride, and vitamin C, all without operator intervention. It can also be equipped with a high-speed homogenizer for the dissolution of solids as well as hot water to dissolve powders.
Brinkmann Instruments Inc.
Integral XT Dynamic Circulators
Brinkmann offers a complete line of Lauda® Integral XT dynamic circulators -- ideal for all types of large-scale research, production, chemical, petrochemical, pharmaceutical, cosmetic, biotech, medical, and other temperature-dependent applications. With temperature control ranging from as low as -90°C to as high as 300°C, these easy-to-use circulators precisely control reactor chemistries and closed-circuit systems. They feature flow rates up to 90 L/min and deliver pressures up to 5.8 bar. Convenience features include automatic bath liquid degassing and draining mode as well as RS-232/485 connectivity.