Watson-Marlow Bredel’s rugged 520RE peristaltic pump is designed for chemical injection applications. The combination of the tube elements and pumphead design allows the unit to be used in applications requiring accurate metering, dosing and transferring. The pumps, with patented LoadSure elements, offer flows from 5 GPH at 30 psi to 7 GPH at 100 psi. They contain fluids within the tube at all times, never allowing the fluid to come into contact with the pump mechanism.
FilterWare for baghouses and other types of fabric filter dust collection systems enables improved process control, maintenance planning and automated EPA compliance reporting while providing plants with other return on investment capabilities, according to FilterSense. The software provides process visualization, report generation and remote services. The software interfaces with the company’s range of diagnostic baghouse controllers, intelligent pulse jet timers, particulate monitors and filter leak/broken bag detectors as well as third-party instrumentation and controls.
Air Cycle Corp.
Air Cycle’s Smash-It pneumatic compactor is powered by compressed air and compacts waste into 55-gallon drums or cubic yard boxes. It produces up to 6,000 lbs. of crushing force, allowing facilities to compact waste to up to 20 percent of its original size. To operate, users place a 55-gallon drum or cubic yard box full of waste on the compactor’s platform. The operator stands next to the machine and places both hands on the OSHA-approved start buttons.
i-LAB handheld analyzing spectrometers from Cole-Parmer weigh 7.4 ounces each and enable users to go directly to the sample source. The battery operated instrument can test water quality, monitor agriculture, measure dyes and colorants, perform quality assurance and control, collect rapid data, conduct environmental research and complete chemical analysis. It conducts absorbance and transmission measurements. A full visible spectrum of a liquid sample is captured and stored within the device for later uploading onto a computer.
ADS’ Hykron Leak Listening System provides high acoustic sensitivity for checking leak noises. As leak noise travels through water and a pipe wall, it can be detected by listening at valves, hydrants, or any available fitting on the pipe. The device detects leak noise through its highly sensitive, built-in electronic sensor. It comes packaged in a carry case with handheld electronic sensor, amplifier with belt attachment, extension rods, magnet attachment and high quality headphones.
The MIDAC open path FTIR Air Monitoring System detects, identifies and measures a wide range of key contaminants simultaneously. Analysis is onsite through a continuous sampling path of up to 1,000 meters. Each system includes an interferometer equipped with a choice of beamsplitters and detectors. The analyzer is coupled to a control PC via standard ribbon cable or long-range fiber optic link. For extended sample paths, the system can be mounted to a rugged, 10-inch Newtonian telescope with tripod.
Gardner Denver Nash
GD Nash’s 2BE4 series vacuum pumps and compressors are a redesign and upgrade to the 2BE3 series. New additions include optimized inlet and discharge porting for enhanced performance, cylindrical roller bearings (upgrade is possible in existing pumps and compressors), optional lobe purge piping and drop-in replacement for existing installations. Inlet bypass piping is not required in most installations, and the series is available in cast iron and stainless steel construction.
Thermo Fisher Scientific Inc.
Thermo Fisher Scientific’s FT-IR sampling solutions provide a cost-effective approach to characterizing the chemical composition of biological systems, such as lipids, in algae. The easy-to-use solutions combine instrumentation, accessories and software to increase the number of biological samples that can be analyzed with automated spectroscopy. Industry professionals can choose from among four different configurations capitalizing on ATR spectroscopy, transmission spectroscopy, reflectance spectroscopy and infrared microscopy to suit varying analytical requirements and sample preparation methods.
Thermo Fisher Scientific Inc.
The Thermo Scientific Orion Star LogR Meters uses the resistance across the bulb to provide a new method for electrode analysis and determine sample temperature. The resistance information can be used to detect errors in the electrode. The meters allow for temperature-compensated pH readings without the use of a separate temperature input. The meter is available in a version with pH input and another with pH and ion-selective electrode inputs.
Danfoss Drives’ DrivePro-tection insurance program for the VLT AQUA Variable Frequency Drives covers the cost of damage from lightning strikes and other line anomalies, load anomalies, accidental exposure to moisture or corrosives and accidental physical damage resulting from collision from the time the units are shipped from the factory. Coverage is available for new and installed drives for up through six years. Local authorized service partner companies provide onsite support and services cover replacement drive material, drive repair labor, travel expense and freight costs.
Petrolab Company’s Grabner IROX FTIR Analyzer delivers fast, accurate and portable fuel testing. The mid-infrared spectrum is measured to provide comprehensive fuel composition information. More than 30 different components and parameters such as octane and cetane numbers, RVP and distillation properties are assessed. Analyzers do not need initial separation of chemical compounds, advanced analytical training to operate or in-depth application knowledge on petrochemical testing. It also monitors biofuels content and reports octane and cetane numbers in fuels from various feedstock.
Moyno Sanitary Pumps are ideal for applications where bacteria and contamination must be avoided and/or frequent cleanup is required. The pumps include standard mechanical seals, and all 150 standard models meet 3A sanitary requirements with no modifications necessary. In addition, a combination close-coupled/open throat design is offered in a standard model. Features include quick disassembly for easy cleaning, no valves to clog or vapor lock, and the ability to handle thin liquids.
KIN-TEK Laboratories Inc.
KIN-TEK’s AutoBlend is a computer-controlled, multi-channel gas blending system for supplying a continuous flow of adjustable composition test gas mixture. Applications include sensor evaluation, analytical methods development and validation, contaminant effects testing, catalyst testing, odor simulation, gas filter testing and other applications. The system uses permeation tubes to add multiple trace components to the gas mixture. It features six independently controlled permeation channels and each channel can contain up to eight compounds for a total of 48 compounds.
Geoprobe Systems’ high-capacity 8040DT subsurface machine features a five-function combo head for installing 2-inch monitoring wells with no cuttings, performing standard penetration testing, high-capacity augering and for driving large-diameter casing. Large power allows the use of different drilling techniques including direct push, air rotary, wet rotary, overburden rotary systems and augering. Options include a coring head, pullback/breakout, and Geoprobe Drop Rack system for tool transport. The product is CE documented, and has 59,000 lbs. of downforce and 80,000 lbs. of pullback.
New Pig Corp.
New Pig’s Universal Mats with Chuck Boxes include heavyweight Universal PIG Mat pads, a mat dispenser, disposal bags and storage container. Constructed from 100 percent polypropylene, the mat absorbs and retains oils, coolants and water and will not leave trapped liquids or fiber residue behind. The dispenser box provides storage of and access to Mat while protecting its contents from dirt and moisture. The Chuck Box is used to store used absorbents until they can be disposed of properly.