Environmental Protection

Air


Munters

Cooling System

Munters’ Oasis indirect evaporative cooling system uses a corrosion-resistant polymer heat exchanger to produce dry, cool air without refrigeration. Best suited for hot, dry climates, the system treats makeup air for 50 percent less energy and provides cooling energy recovery and winter heat recovery. The product assists in reducing peak demand loads.

    Farr Air Pollution Control

    Dust Collector

    Farr’s Gold Series GS4M Mini dust collector controls emissions from small airflow applications up to 2,000 cfm. The collector is a pre-wired unit with a low-noise fan (less than 70 dB), controls, motor starter, filters and cleaning system. It contains four HemiPleat® flame-retardant filter cartridges with 788 square feet of media. The automatic, reverse-pulse cleaning system is activated by an on-demand control panel. A safety monitoring filter is included to allow recirculation of the filtered air downstream for energy savings.

      Parker domnick hunter

      Dry Air System

      Parker domnick hunter’s PNEUDRI MiDAS is a mini dry air system that provides plant engineers uninterrupted clean and dry compressed air. The unit contains a particulate filter and a desiccant cartridge inside a single module. The product features top-end re-pressurization and a quick-release top cap arrangement that does not require inlet/outlet ports to be disconnected. The unit is available at a pressure dew point of -40 or -100 degrees Fahrenheit, and at flow rates of 3- to 20-scfm at 100 psig.

        EXAIR Co.

        Vacuum Generators

        EXAIR’s Adjustable E-Vac® series of compressed air-powered vacuum generators adjust vacuum and flow rates to suit application requirements. The vacuum pumps are designed for a variety of box opening, clamping, lifting, chucking and surface mounting applications. With a turn of the unit, vacuum and flow levels can be changed to overcome porosity and increase or decrease the lifting power. The straight-through, single-stage aluminum construction requires no vacuum filter and passes contaminants from dirty environments through the unit.

          EXAIR Co.

          Air Knife

          EXAIR’s Type 316 Stainless Steel Super Air Knife is designed for blocking harmful vapors and fumes on plating operations, blowing corrosive chemicals off parts, drying pharmaceutical products, and cooling hot materials such as molten glass, castings and molded parts. The uniform sheet of high-velocity air pulls in surrounding room air and amplifies it at a ratio of 40:1. The product can withstand temperatures up to 800 degrees Fahrenheit and contains no moving parts.

            Strobic Air Corp.

            Ventilation

            The patent pending Strobic Air® Smart Fan™ maintains safe ventilation levels while minimizing facility energy costs and carbon footprint. It is designed for use in “safety critical” applications such as laboratory fume hood exhaust and ventilation for specialized care environments like airborne infection isolation rooms. The device, which uses a combination of sensors and controls, continually adjusts fan speed to produce optimal flow. It also can sense failure and turn on a “stand by” fan to maintain safe exhaust operations.

              Fluid Components International

              Thermal Mass Flow Meter

              The new ST50 Remote Mount Flow Meter from Fluid Components International features an intelligent, no-moving parts thermal mass flow sensor design. It measures air flow from 1 to 125 SFPS, nitrogen from 1 to 150 SFPS, and compressed air from 4 to 400 SFPS. Accuracy is +1% of reading, +0.5% of full scale, with repeatability of +0.5% of reading. This meter is designed to work in crowded equipment or hazardous plant areas where explosives, flammable, or toxic gases may be present.

                Casella USA

                Air Sampling Pumps

                The TUFF™ line of personal air sampling pumps from Casella USA features a sealed case with rubber over-molding that protects internal electronics from moisture, extreme temperatures, solvents, and impact. Offering a flow range from 5 ml/min to 4.5 l/min, the three pumps that comprise the new line are suited to occupational health applications such as simple abatement sampling or specialized industrial hygiene monitoring of dusts, fumes, and vapors. All pumps incorporate a double-acting diaphragm pump mechanism with precise digital control, providing real-time flow control and stability.



                  Red Valve Co.

                  Slurry Knife Gate Valve

                  The Series DX Slurry Knife Gate Valve is designed for heavy slurry applications in the power and mining industries. When the valve opens, the reinforced elastomer sleeves seal against each other and provide a 100 percent full port opening, minimizing turbulence and wear. The seats isolate and protect all metal parts from the process. Each time the strokes, the valve discharges a small amount of slurry, keeping the gate path and seat area clear of entrapped particulates.

                    Perma Pure

                    Dilution Probe

                    Baldwin Model 45 Dilution Extraction Probe eliminates the need for conditioning systems and high-cost heated lines by reducing water vapor content in sample gas. The out-of-stack system dilutes the sample gas with dry air by a ratio of between 25:1 and 250:1. This device features a unique hard metal critical orifice for improved durability, repeatability, and cleaning during blowback. The probe is housed in a rugged NEMA 4X enclosure for external mounting.

                      Rypos

                      Diesel Particulate Filter

                      The California Air Resources Board has verified the Rypos DPF/Low Emission Transport Refrigeration Unit (Level 2 Plus) diesel particulate filter for use on most trailer transport refrigeration units (TRUs) using 2002 and older model year engines. The self-cleaning diesel exhaust filter uses an electrically conductive sintered metal fiber medium and electrical power from the TRU to regenerate the filter when needed. It is microprocessor controlled with a backpressure control system, an electrical control circuit, and a backpressure warning indicator.

                        Teledyne Leeman Labs

                        Hydra IIAA

                        Teledyne Leeman Labs of Hudson, N.H., a manufacturer of analytical instrumentation for elemental analysis, has released the Hydra IIAA Automated Mercury Analyzer.

                        This product has low, 1 ppt detection limits, fast sample throughput, and high capacity. Its 270-position autosampler will enhance the productivity of any laboratory involved with mercury analysis. The unit incorporates new software that automates the analytical process from Method Development to Final Report Generation. Help is provided in the software including scheduled maintenance and audio/visual tutorials.

                        This analyzer also can be upgraded to direct solids analysis.


                          Photovac, Inc.

                          PetroPRO for BTEX

                          Photovac, Inc., the manufacturer of premium instruments for volatile organic compound analysis in air, soil, and groundwater, has introduced the PetroPRO for the detection of BTEX compounds.

                          The measurement of BTEX compounds (benzene, toluene, ethylbenzene, and xylene) is critical to maintain compliance with environmental and occupational health and safety regulations. The intrinsically safe PetroPRO provides real-time measurements and, with its gas chromatography-based technology, it offers unsurpassed accuracy with the lowest detection limits available in a portable instrument. The PetroPRO is easy to operate, thereby minimizing training time. With the simple push of a button, the PetroPRO runs through the BTEX analysis and provides quick results.


                            VICI Metronics Inc.

                            Model 150 Dynacalibrator®

                            VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations.

                            A passivated Inertium® coated stainless steel permeation chamber houses the permeation device(s), with measured inert carrier gas sweeping the calibration gas/vapor from the chamber. The digital temperature controller maintains the chamber temperature at a setpoint with an accuracy of ±0.01°C, traceable to NIST standards. Reduced flow path volume permits low concentration generation of mercury, water, and other difficult-to- work-with materials.


                              Solvay Chemicals

                              Cleaners

                              The SOLVAir™ line removes sulfur oxides, hydrogen sulfide, nitrogen oxides, hydrochloric acid, hydrofluoric acid, and heavy metals from flue gas emissions. The line includes SOLVAir Hydrogen Peroxide, which scrubs stack gases that contain sulfur dioxide and nitrogen oxides or odors; SOLVAir Select 50 and 200, mechanically refined trona ore, which neutralizes acid gases in gas process streams; SOLVAir Select SA, which desulfurizes flue gas; and SOLVAir Select SS, which removes sulfur trioxide acid.


                                Free e-News Subscription

                                I agree to this site's Privacy Policy