Environmental Protection

Air


EXAIR Co.

PEEK Super Air Nozzle

PEEK Super Air Nozzle

PEEK Super Air Nozzle

EXAIR’s PEEK 3/8 NPT Super Air Nozzle features protective aerodynamic slots that guide the airflow to a single point of convergence for hard-hitting force and dramatic noise reduction over typical blowoffs. Its PEEK plastic construction provides non-marring protection to production items and excellent resistance to damage from harsh chemicals and it operates in temperatures up to 320°F (160°C). The nozzle is suitable for blowoff, cooling and drying applications located in general industrial or corrosive environments.

The Model 1104-PEEK 3/8 NPT Super Air Nozzle provides a strong blowing force. High amplification of airflow produces a blowing force of 1.9 pounds (850 grams), with air consumption of only 35 SCFM at 80 PSIG. Safe operation is assured since the airflow of the CE compliant Super Air Nozzle cannot be blocked, which meets OSHA dead-end pressure standard 29 CFR 1910.242(b). Sound level is very low at 82 dBA and meets OSHA noise requirement 29 CFR 1910.95(a).

The 1104-PEEK Super Air Nozzle is designed to easily replace existing wasteful nozzles or open pipes. The 3/8 NPT Super Air Nozzle is also available in Type 316 Stainless Steel and Zinc Aluminum alloy. Other PEEK thermoplastic air nozzles are available in M4x.05, M5x.05, M6x.075, 1/8 NPT and 1/4 NPT thread sizes. 


    EXAIR Co.

    aitnozzle

    1” Flat Super Air Nozzle

    Flat Super Air Nozzle produces a flat 1" (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target. The unique design of this efficient nozzle makes it an ideal fit for both tight spaces and tight budgets. The 1" Flat Super Air Nozzle uses EXAIR's patented technology to maximize entrained airflow while reducing noise levels. A precise amount of air is released through the .015" (0.38mm) air gap opening that is set with a stainless steel shim positioned between the body and removable cap. The airstream pulls in surrounding room air to produce a wide, forceful stream of high velocity, laminar airflow. Air consumption is 10.5 SCFM at 80 PSIG. The 75 dBA sound level is below the limits of the OSHA maximum allowable noise exposure standard 29 CFR 1910.95(a).  Force and flow may be easily adjusted by installing different shim thicknesses. Optional swivel fittings and Stay Set Flexible Hoses to aim the nozzle are also available. The 1" Flat Super Air Nozzle is available in zinc aluminum alloy construction, suitable for rugged industrial applications. 

    http://www.exair.com/en-US/Primary%20Navigation/Products/Air%20Nozzles/Air%20Nozzles/Nozzles/Pages/1-Inch-Flat-Super-Air-Nozzle.aspx


      Droplet Measurement Technologies

      Instascope

      InstaScope

      InstaScope is a revolutionary new tool that is changing the way property management, loss remediation and cleaning industries do business. By providing real-time information about indoor air conditions, specifically the presence of mold and biological particles, the InstaScope has become an invaluable tool for residential and commercial property inspections as well as remediation and restoration assessment in the event of a water loss or fire. These assessments ultimately provide the critical, objective data that is needed in the risk management and asset preservation relationships between property owner, service provider and the insurance industry. The InstaScope is a wide band integrated particle-by-particle bioaerosol optical spectrometer. The instrument identifies the quantitative optical signatures of biological particles via UV induced fluorescence. 

      http://www.dropletmeasurement.com/


        Air Cycle

        The Bulb Eater 3 with Intelli Technology

        The Bulb Eater® 3 with Intelli Technology

        The Bulb Eater® 3 with Intelli Technology:
        The next generation Bulb Eater crushes straight, u-tube, and CFL lamps in a single machine! Intelli Technology onboard controls feature multiple sensing points for machine diagnostics and maintenance, and an LCD control panel for easy operating. The Bulb Eater 3 uses a new 5-stage filtration system and is OSHA & ACGIH compliant. Save up to 50% on recycling costs, reducing labor related costs and required storage space!

        View Demo Here!
        Air Cycle Corporation
        800-909-9709


          Aeroqual

          S500 ENV

          S500 ENV

          S500 ENV

          Until now those wanting outdoor air quality information have been limited to using diffusion tubes which are variable in accuracy and unable to give real-time data or optical reference analysers, which lack portability and are hugely expensive. The S500 ENV meets the need for accurate real-time air quality information in a portable lightweight package that is easily affordable for short term studies, hot-spot monitoring, and taking intermittent measurements.

          The S500 ENV comes equipped with a lithium battery capable of 8 hours continuous operation before charging is required, and can log over 8,100 measurements – more than enough for a full day in the field. Customers can choose from a range of interchangeable sensor heads including nitrogen dioxide, carbon monoxide, carbon dioxide, ozone, hydrogen sulphide, sulphur dioxide, ammonia, and VOCs. A simple to use software package lets them download and manipulate data on their PC. And by adding the water and dust proof enclosure, the S500 ENV can be left in situ for a number of days, allowing for trend data to be captured. 


            World Water Works, Inc.

            www/RESOURCE DAF

            www RESOURCE DAF

            www RESOURCE DAF

            World Water Works, Inc. announces the availability of its new www/RESOURCE DAF, a next generation dissolved air flotation (DAF) system that handles flows from 5,000 to 8,000 gallons per minute (gpm) and is ideal for industries ranging from food processing, to desalination pretreatment, to textiles, to petroleum, and beyond. Pilot treatment plants are available and thorough bench testing and pilot treatability studies are conducted to guarantee results.

            With a high total dissolved solids (TDS) and saltwater tolerance, www/RESOURCE DAF provides the flexibility to outperform traditional DAFs and ensure longevity. Heavy duty durable polypropylene construction allows operation over a wide temperature range and pH range of 2-13, so the system offers tremendous treatment flexibility. The system’s design guarantees low operational and maintenance costs. Consistent and reliable performance ensures compliance with government regulations.

            The www/RESOURCE DAF system uses DAG (Dissolved Air Generator) technology, which allows the removal of fine insoluble materials by generating 5-12 micron bubbles, the finest in the industry. The DAG system achieves saturation efficiencies that approach 100 percent at low energy consumption. This performance has been documented through upgrades of existing systems that show the new DAG technology improves performance while reducing energy costs by more than 50 percent.


              Bionomic Industries, Inc.

              BIONOxSOLVER

              BIONOxSOLVER

              BIONOxSOLVER

              Bionomic Industries, Inc., a manufacturer of proven air pollution abatement, product, and heat recovery technologies, has announced the first major breakthrough NOx control chemistry for a wide range of scrubber system operations and applications.

              Unlike typical NOx sulfide/caustic control chemistry, low toxicity BIONOxSOLVER will not liberate flammable and dangerous hydrogen sulfide gas at pH use conditions and its special proprietary formulation of powerful nitrogen dioxide reducing agents can achieve over 33% greater removal efficiency with a simple addition to caustic.

              Typical applications include removal of nitrogen dioxide emissions from catalyst calcining and preparation, precious metals dissolving, acid dipping and pickling of metals, silicon wafer and circuit board etching, nitrite and nitrate chemical production, medicinal production, nitric acid storage and purging, and nitrogen dioxide removal.


                Fluid Components International

                FCI ST100

                ST100

                ST100

                The ST100 Series Flow Meter sets a new industry benchmark in process and plant air/gas flow measurement, delivering unsurpassed adaptability and value to meet plant gas flow measurement applications for today and tomorrow.

                The ST100 Flow Meter’s graphical, multivariable, backlit LCD display/readout brings new meaning to the term “process information”. It provides the industry’s most comprehensive information with continuous display of all process measurements and alarm status, and the ability to interrogate for service diagnostics.

                The user-friendly ST100 stores up to five unique calibration groups to accommodate broad flow ranges, differing mixtures of the same gas and multiple gases, and obtains up to 1000:1 turndown.  An optional, patent-pending SpectraCal Gas Equivalency calibration method lets users select and switch between 10 common gases. An on-board data logger with an easily accessible, removable 2-GB micro-SD memory card capable of storing 21 million readings comes standard.

                The ST100 offers three different types of flow sensors to best match user applications.  The fast-response FPC-style is a fast response features an integral flow conditioner and protective shroud optimized for compressed air and clean gas applications. The fast-response, general purpose FP-style features a protective shroud and is the sensor used with FCI’s VeriCal in-situ calibration option.  For wet or dirty gases, or erratic flows, the unshrouded S-style facilitates easy cleaning and provides a smoothed response.

                The ST100 can be calibrated to measure virtually any process gas, including wet gas, mixed gases and dirty gases.  The basic insertion style air/gas meter features a thermal flow sensing element that measures flow from 0.25 to 1000 SFPS (0.07 NMPS to 305 NMPS) with accuracy of  ±0.75 percent of reading, ±0.5 percent of full scale.  

                Designed for rugged industrial processes and plants, ST100 Flow Meters include service up to 850ºF and are available with both integral and remote (up to 1000 feet) electronics versions. The ST100 is agency approved for hazardous environments, including the entire instrument, the transmitter and the rugged, NEMA 4X/IP67 rated enclosure.  Instrument approvals in addition to ATEX and IECEx include FM and FMc.




                  Valco Instruments Co. Inc.

                  Model DV22 Mini Diaphragm Valve

                  Model DV22 Mini Diaphragm Valve

                  VICI’s Microvolume Diaphragm Valve by Valco Instuments, Co. Inc. (VICI) is designed for trouble-free use in applications that require minimal maintenance and maximum lifetime, making it the ideal choice for the process industry, automated lab analyzers, and continuous-monitoring environmental analyses. Three configurations are available: a 4 port internal loop sample injector, a 6 port external loop sampling/switching valve, and the industry’s first 10 port multifunctional diaphragm valve.

                  Lifetime for the DV22 can exceed 1,000,000 cycles at ambient temperature/300 psi or 500,000 cycles at 175°C/300 psi. The standard valve is for applications in which the sample is above ambient pressure, but it can also be used with sub-ambient pressures, such as when the sample is pulled through the valve by vacuum.

                  Actuator air (40-50 psi) is supplied to a side port with 10-32 female threads, permitting use of a variety of compression or barbed fittings. A 3-way solenoid is required for actuation, which may be ordered separately.Maintenance procedures are greatly simplified, since the valve is held together by a single screw and locating pins insure proper alignment.


                    Plasma Etch

                    Plasma Etch Magna Series

                    Magna Series

                    Magna Series

                    Plasma Etch, Inc. has developed a technology called the Magna Series(patent pending) that eliminates the need of CF4 gas that is presently used by printed circuit board manufacturers throughout the world with the use of plasma etching systems for desmear and etchback processing applications.

                    The Magna Series Technology is a great achievement and advancement in the protection of the global environment and preservation of our ozone layer. The new product eliminates the need of CF4 gases, does not require the use of O2 bottles, and uses less power than traditional plasma etching systems that are currently in use.

                    Plasma Etch reports the Magna Series has also set new market standards in several other key areas. The new technology provides faster etch times, lower operating cost, and process uniformity that is not achievable by using existing technologies.


                      General Monitors

                      General Monitors SM100 Sampling Pump Module

                      SM100 Sampling Pump Module

                      SM100 Sampling Pump Module

                      The new SM100 Sampling Pump Module from General Monitors draws combustible or toxic gases at 0.05 to 1 LPM from monitored areas to a gas detector, making it easier and more cost effective to measure potentially hazardous gases in areas that are too remote, inaccessible, cold, hot, or wet for direct sensor monitoring.

                      The user-friendly SM100 Sampling Pump Module supplies gas for up to three gas detectors, which is useful for monitoring multiple gases in a single line. The SM100 features a low flow indicator that informs the end user if flow is insufficient for gas detection. The product also includes a trouble relay that provides a local signal indication of the low flow condition.

                      The SM100 Sampling Pump Module reduces plant operating costs by simplifying operation and maintenance. The product’s rugged design and 316-stainless steel construction make it suitable for gas detection service in a variety of harsh industrial environments. Areas particularly suited for monitoring with the SM100 include ducts carrying combustible or toxic gas, wet wells, sewage dryers, printing drying ovens, and storage tanks.

                      The SM100 is available in two configurations, an aspirated model that is used with a compressed air source and a DC pump module. The aspirated model is designed for use with instrument grade aspirator air, up to a max aspirator pressure of 30 psig (206 kPa).

                      The SM100 operates at a wide temperature range of -4°F to +131°F (-20°C to +55°C) and at a humidity range of 15-95% RH, non-condensing. Its enclosure is C-UL-US approved and designed for use in Class I, Div. 1, Groups A, B, C & D.


                        Free e-News Subscription

                        I agree to this site's Privacy Policy