Environmental Protection

Browse by Company


  • General Monitors

General Monitors

General Monitors SM100 Sampling Pump Module

SM100 Sampling Pump Module

SM100 Sampling Pump Module

The new SM100 Sampling Pump Module from General Monitors draws combustible or toxic gases at 0.05 to 1 LPM from monitored areas to a gas detector, making it easier and more cost effective to measure potentially hazardous gases in areas that are too remote, inaccessible, cold, hot, or wet for direct sensor monitoring.

The user-friendly SM100 Sampling Pump Module supplies gas for up to three gas detectors, which is useful for monitoring multiple gases in a single line. The SM100 features a low flow indicator that informs the end user if flow is insufficient for gas detection. The product also includes a trouble relay that provides a local signal indication of the low flow condition.

The SM100 Sampling Pump Module reduces plant operating costs by simplifying operation and maintenance. The product’s rugged design and 316-stainless steel construction make it suitable for gas detection service in a variety of harsh industrial environments. Areas particularly suited for monitoring with the SM100 include ducts carrying combustible or toxic gas, wet wells, sewage dryers, printing drying ovens, and storage tanks.

The SM100 is available in two configurations, an aspirated model that is used with a compressed air source and a DC pump module. The aspirated model is designed for use with instrument grade aspirator air, up to a max aspirator pressure of 30 psig (206 kPa).

The SM100 operates at a wide temperature range of -4°F to +131°F (-20°C to +55°C) and at a humidity range of 15-95% RH, non-condensing. Its enclosure is C-UL-US approved and designed for use in Class I, Div. 1, Groups A, B, C & D.


    General Monitors

    General_Monitors_Ultrasonic_Gas_Leak_Detector

    Ultrasonic Gas Leak Detector

    General Monitors’ Gassonic Observer is now FM- and CSA-certified, which means the detector has been evaluated through independent scientific testing and found to be safe and reliable. The detector features a microphone and a detection radius of up to 20 meters at a leak rate of 0.1 kg/s. In addition, the detector offers the Senssonic integrated acoustic self-test, which periodically verifies the integrity of the electronic circuitry and the operation of the acoustic sensor.

      General Monitors

      Toxic Gas Detector

      The TS4000H Intelligent Toxic Gas Detector from General Monitors is compatible with HART communication protocol. The detector offers protection against a wide range of hazardous industrial gases, including chlorine and hydrogen chloride, and is able to safeguard against oxygen deficiency. Designed for use in waste and wastewater treatment sites, the device features event logs, an LED display and explosion-proof housing. The system displays gas concentrations up to 500 ppm, fault codes for troubleshooting, and prompting when calibration is needed.

        General Monitors

        Toxic Gas Detector

        The TS4000H Intelligent Toxic Gas Detector from General Monitors is compatible with HART communication protocol. The detector offers protection against a wide range of hazardous industrial gases, including chlorine and hydrogen chloride, and is able to safeguard against oxygen deficiency. Designed for use in waste and wastewater treatment sites, the device features event logs, an LED display and explosion-proof housing. The system displays gas concentrations up to 500 ppm, fault codes for troubleshooting, and prompting when calibration is needed.

          General Monitors

          Gas Detector Calibration

          Model S4000CH Combustible Gas Detector owners can calibrate this device with the new Automatic Remote Gas Calibrator from General Monitors. The unit, which allows calibration gas to be applied to the catalytic bead sensor from easily accessible locations, consists of a remote gas calibrator and a solenoid valve. The device blocks ambient air and redirects the calibration gas to the catalytic bead sensor for calibration or testing sensor accuracy. It can calibrate gases at wind velocities as high as 50 mph and maximum temperatures of 75°C.

            Free e-News Subscription

            I agree to this site's Privacy Policy