Environmental Protection

Browse by Company


  • EXAIR Co

EXAIR Co.

PEEK Super Air Nozzle

PEEK Super Air Nozzle

PEEK Super Air Nozzle

EXAIR’s PEEK 3/8 NPT Super Air Nozzle features protective aerodynamic slots that guide the airflow to a single point of convergence for hard-hitting force and dramatic noise reduction over typical blowoffs. Its PEEK plastic construction provides non-marring protection to production items and excellent resistance to damage from harsh chemicals and it operates in temperatures up to 320°F (160°C). The nozzle is suitable for blowoff, cooling and drying applications located in general industrial or corrosive environments.

The Model 1104-PEEK 3/8 NPT Super Air Nozzle provides a strong blowing force. High amplification of airflow produces a blowing force of 1.9 pounds (850 grams), with air consumption of only 35 SCFM at 80 PSIG. Safe operation is assured since the airflow of the CE compliant Super Air Nozzle cannot be blocked, which meets OSHA dead-end pressure standard 29 CFR 1910.242(b). Sound level is very low at 82 dBA and meets OSHA noise requirement 29 CFR 1910.95(a).

The 1104-PEEK Super Air Nozzle is designed to easily replace existing wasteful nozzles or open pipes. The 3/8 NPT Super Air Nozzle is also available in Type 316 Stainless Steel and Zinc Aluminum alloy. Other PEEK thermoplastic air nozzles are available in M4x.05, M5x.05, M6x.075, 1/8 NPT and 1/4 NPT thread sizes. 


    EXAIR Co.

    aitnozzle

    1” Flat Super Air Nozzle

    Flat Super Air Nozzle produces a flat 1" (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target. The unique design of this efficient nozzle makes it an ideal fit for both tight spaces and tight budgets. The 1" Flat Super Air Nozzle uses EXAIR's patented technology to maximize entrained airflow while reducing noise levels. A precise amount of air is released through the .015" (0.38mm) air gap opening that is set with a stainless steel shim positioned between the body and removable cap. The airstream pulls in surrounding room air to produce a wide, forceful stream of high velocity, laminar airflow. Air consumption is 10.5 SCFM at 80 PSIG. The 75 dBA sound level is below the limits of the OSHA maximum allowable noise exposure standard 29 CFR 1910.95(a).  Force and flow may be easily adjusted by installing different shim thicknesses. Optional swivel fittings and Stay Set Flexible Hoses to aim the nozzle are also available. The 1" Flat Super Air Nozzle is available in zinc aluminum alloy construction, suitable for rugged industrial applications. 

    http://www.exair.com/en-US/Primary%20Navigation/Products/Air%20Nozzles/Air%20Nozzles/Nozzles/Pages/1-Inch-Flat-Super-Air-Nozzle.aspx


      EXAIR Co.

      digitalflowmeter

      Digital Flowmeter

      Digital Flowmeter is the easy way to monitor compressed air consumption and waste. Models are now available for ½” to 4” schedule 40 iron pipe and ½” to 6” in iron or copper pipe. The product is available with Summing Remote Display to monitor from a convenient location. The product is also available with Data Logger to record flow rate from once a second up to every 12 hours. The product has an easy-to-read digital display and is easy to install.

      http://www.exair.com/en-US/Primary%20Navigation/Products/Optimization/Digital%20Flowmeter/Pages/Digital%20Flowmeter.aspx


        EXAIR Co.

        HEPAVac

        Heavy Duty HEPA Vac

        EXAIR’s new Heavy Duty HEPA Vac attaches to an ordinary 55 gallon open top drum to turn it into a powerful, HEPA quality, industrial vacuum cleaner. The Heavy Duty HEPA Vac is designed to move more material with less wear. In addition, this vacuum has been engineered to filter contaminants to HEPA requirements in dusty environments requiring frequent cleaning. It is extremely quiet at 82 dBA (half the noise of electric vacs), making it suitable for a wide variety of environments. An economical, easily maintained pre-filter stops larger particles, while the HEPA filter handles the smaller matter. All filters are tested for minimum 99.97% filtration at the 0.3 micron level to meet HEPA standards in strict accordance to IEST-RP-CC-007. The Heavy Duty HEPA Vac System comes complete with the Heavy Duty Dry Vac, lever lock drum lid, shutoff valve, pre-filter, HEPA filter, 10' (3m) static resistant hose, hose hanger, 1/2 NPT quick connects coupling, 20' (6m) compressed air hose, pressure gauge, and aluminum chip wand (drum not included).

        http://www.exair.com/en-US/Primary%20Navigation/Products/Industrial%20Housekeeping/HeavyDutyHEPAVac/Pages/HeavyDutyHEPAVac.aspx


          EXAIR Co.

          USB Data Logger for Digital Flowmeter

          USB Data Logger for Digital Flowmeter

          EXAIR’s Digital Flowmeter provides an excellent way to monitor compressed air consumption and waste. Now, with the addition of the new USB Data Logger, you also can maintain a history of the Digital Flowmeter’s measurements for analysis. Use the included software to configure the Data Logger to record your flow rate, and record from once a second (about nine hours of data) to up to once every 12 hours (more than two years). Regular monitoring of compressed air usage makes it possible for companies to save thousands of dollars per year by identifying costly leaks or inefficient air products.


            EXAIR Co.

            EXAIR Chip Trapper

            Liquids Cleaner

            EXAIR’s Chip Trapper cleans solids, including chips, swarf and shavings, out of used coolants and other liquids. The unit vacuums the coolant or liquid that is filled with debris into a 55 gallon drum and traps solids in a reusable filter bag. The device is powered by compressed air and features a built-in pressure/vacuum relief, a stainless steel two-way pump assembly, a directional flow valve, a 10 foot vacuum hose and a 20 foot compressed air hose.

              EXAIR Co.

              EXAIR_Heavy_Duty_Dry_Vac

              Heavy Duty Dry Vac

              EXAIR’s Heavy Duty Dry Vac is a rugged, industrial duty vacuum cleaner that has been engineered to vacuum high volumes of dry materials. The wear-resistant design is suitable for the clean-up of abrasive materials like steel shot, garnet, metal chips, and sand, yet can be used for general purpose applications. The vacuum is compressed air powered and attaches to the user supplied 55 gallon open-top drum. It is extremely quiet at 77 dBA. Surrounding air is kept clean by the 0.1 micron filter bag.

                EXAIR Co.

                Technical_Guide

                Technical Guide

                EXAIR’s Catalog 23 is a full color, technical guide with solutions to common industrial cooling, drying, conveying, blowoff, cleaning and static electricity problems. The 160 page catalog features products that can help companies conserve compressed air and reduce noise levels. The guide features new E-Vac Vacuum Generators, Super Air Knives, Super Air Nozzles, Super Air Wipes, Vortex Tubes and Cold Gun tool coolers and includes a detailed technical explanation, performance data, application photos and dimensional drawings.

                  EXAIR Co.

                  Super_Air_Knife

                  Super Air Knife

                  EXAIR’s PVDF Super Air Knife provides a laminar curtain of air that can be used to blow off, clean and dry materials in highly corrosive environments not suitable for stainless steel. It is ideal for use in the manufacturing of solar cells, lithium ion batteries, semiconductors, medical devices and processes that include electroplating, transfer of acids, caustic chemicals, brine, and solvent recovery. The product consists of PVDF, Hastelloy C-276 alloy screws, and a PTFE shim to adjust the airstream.

                    EXAIR Co.

                    Conveyor

                    EXAIR’s Heavy Duty Threaded Line Vac Conveyors convert piping to a conveying system for steel shot, metal parts, scrap, and trim bulk materials. Designed for rugged, industrial applications, the device has a hardened alloy construction. The conveyors eject a small amount of compressed air through directed nozzles to produce a vacuum on one end with high output flows on the other.

                      EXAIR Co.

                      Vacuum Generators

                      EXAIR’s Adjustable E-Vac® series of compressed air-powered vacuum generators adjust vacuum and flow rates to suit application requirements. The vacuum pumps are designed for a variety of box opening, clamping, lifting, chucking and surface mounting applications. With a turn of the unit, vacuum and flow levels can be changed to overcome porosity and increase or decrease the lifting power. The straight-through, single-stage aluminum construction requires no vacuum filter and passes contaminants from dirty environments through the unit.

                        EXAIR Co.

                        Air Knife

                        EXAIR’s Type 316 Stainless Steel Super Air Knife is designed for blocking harmful vapors and fumes on plating operations, blowing corrosive chemicals off parts, drying pharmaceutical products, and cooling hot materials such as molten glass, castings and molded parts. The uniform sheet of high-velocity air pulls in surrounding room air and amplifies it at a ratio of 40:1. The product can withstand temperatures up to 800 degrees Fahrenheit and contains no moving parts.

                          Free e-News Subscription

                          I agree to this site's Privacy Policy