Environmental Protection

Browse by Company


  • Control Co

Control Co.

Traceable Digital Thermometer

Control Company's Traceable Digital Hygrometer/Thermometer/Dew Point instrument provides a response time of under 10 seconds with a resolution of 0.01% RH, 0.01°F/°C, and 0.01° dew point °F/°C. It samples one-and-a-half times per second. Results are reported in both °F and °C from –40.00 to 220.0°F (–40.00 to 104.0°C) temperature, and from –40.00 to 140.0°F (–40.00 to 60.00°C) dew point. Temperature resolution is 0.01° with an accuracy of ±0.4°C. High and low alarms can be programmed in dew point/frost point, temperature, and humidity. When an out-of-range condition is sensed, an alarm sounds and the display flashes. Computer output permits data to be captured, transferred, stored, and printed. Memory recalls both minimum and maximum readings in dew point/frost point, temperature, and humidity at any time.

    Control Co.

    Control Pen

    Control Pen

    Control Company's new Counter Pen is a combination marker and digital counter designed for the lab and plant. Each time a black mark is made with the felt-tipped pen, it automatically sounds a beep, and LCD displays the counts. Use it to count cell growth on petri dishes, inventory parts, and tally samples received.

      Control Co.

      Control_Co_Vane_Anemometer_Pens

      Vane Anemometer Pens

      Control Company’s Traceable Vane Anemometer Pens consist of three units that can provide for airflow/temperature, airflow/temperature/humidity/dew point and airflow/temperature/ humidity /dew point/barometric pressure. The units offer high contrast 3/8-inch LCD digits, simple operation and a tough ABS plastic housing with o-ring seal and membrane keypad to keep out dust and dirt. The unit recalls minimum/maximum readings at the press of a button.

        Control Co.

        Control_Traceable_Dissolved_Oxygen_Pen

        Traceable Dissolved Oxygen Pen

        Control Company’s Traceable Dissolved Oxygen Pen has a tough ABS plastic housing and water-resistant design with o-ring seal and membrane keypad to ensure a long life in severe lab or harsh plant environments. The hold button freezes the reading on the display. The high contrast, easy to read 3/8-inch-high LCD digits simultaneously display oxygen concentration and temperature. The unit recalls minimum/maximum readings at the press of a button.

          Control Co.

          Conductivity/TDS/Salinity Meter

          Control Company’s Traceable Conductivity/TDS/Salinity Meter is equipped with chemical-resistant waterproof ABS plastic housing. The device contains LCD digits and a dual-display that shows readings and temperatures. Temperature compensation allows readings to be automatically referenced to the international standard of 25 degrees Celsius, or the user can set a programmable temperature coefficient.

            Free e-News Subscription

            I agree to this site's Privacy Policy